/*
    ____  __________________________________  ____ 
   / __ \/ ____/_  __/ ____/ ____/_  __/ __ \/ __ \
  / / / / __/   / / / __/ / /     / / / / / / /_/ /
 / /_/ / /___  / / / /___/ /___  / / / /_/ / _, _/ 
/___________/ __________/\____/ _____\__________|  
   / __ )/ / / /  _/ /   / __ \/  _/ | / / ____/   
  / __  / / / // // /   / / / // //  |/ / / __     
 / /_/ / /_/ // // /___/ /_/ // // /|  / /_/ /     
/_____/\____/___/_____/_____/___/_/ |_/\____/      
                                                   
Ladue Horton Watkins High School Science Olympiad

Licensed under the Parity Public License
*/


#include <curveFitting.h>


using ld = long double;


const int LED_R = 8, LED_G = 10, LED_B = 12, THERM = 0; // Device component pins
const ld R_k = 10000, V_in = 5, analog_max = 1023; // Device constants

// Analog to digital conversion
ld a2d(int a) { return V_in * a / analog_max; }
int d2a(ld d) { return d * analog_max / V_in; }

// Voltage to resistance conversion
ld v2r(ld V_out) { return R_k * (V_in / V_out - 1); }

ld vol[100];
int con[100];

const int order = 2;
int coeff[order + 1];

void setup() {
  Serial.begin(9600);
  Serial.println("Starting calibration")
  Serial.println("Place sensor in water and enter the concentration into the console")
  Serial.println("When you are finished, type c to continue")
  
  int n = 0;
  while (1) {
    String s = Serial.readString();
    if (s == "c") break;
    vol[n] = a2d(analogRead(THERM));
    con[n] = toInt(s);
    Serial.println(n);
    Serial.println(vol[n]);
    Serial.println(con[n]);
    ++n;
  }
  
  fitCurve(order, n, vol, con, coeff);
}

void loop() {
  v = a2d(analogRead(THERM));
  c = 0;
  for (int i = order; i >= 0; --i) c = v*c + coeff[i];
  Serial.println(c);
}